East Midland Lace Bobbin
© Graham Booth 2002
Speed’n’eze friction polish gives a good finish: the finish must not mark or stain thread. Overall length may vary from 100mm (common) to 110mm. Wood must be fine and close-grained. Traditionally, fruit woods would often be used. The Bobbin illustrated is of a simple design; there are many more complex and ornate styles available from bobbin makers. Final finish must be perfectly smooth so as not to snag the lace thread.
a. 8mm long, 7mm dia.
b. 25mm long, 3.5mm dia. is Erin (Doors) preference but 20mm is common.
c. 4-5mm long, 7.5mm dia.
d. 55mm long, 7.5mm dia (max). Shape and length may be varied.
e. 6.5mm long, 6mm dia.
f. 6mm long, 5.5mm dia
|
